LIFTER VALLEY SCREEN KITS
This kit is designed to minimize damage caused by valve train and other breakage in the
engine by keeping debris away from the engine's rotating assembly and oil pump pickup.
Special pre-formed screens are secured with high strength epoxy over the oil drainback
holes to catch metal fragments. Allen socket plugs are included for installation in the galley
to direct the oil returning from the cylinder heads away from the spinning crankshaft,
thereby reducing windage loss and aiding oil control.
PART #
APPLICATION
CONTENTS
29-4001
CHEVROLET SMALL BLOCK
TWO PRESS-IN SCREENS, TWO LARGE FORMED SCREENS, EIGHT 1/4" NPT SOCKET PLUGS AND EPOXY.
29-4002
CHEVROLET BIG BLOCK
ONE PRESS-IN SCREEN, TWO LONG SCREENS AND EPOXY.
LIFTER VALLEY VENTS
These vents aid oil control by providing positive crankcase ventilation and eliminating lifter valley oil
drain-through to crankshaft, which results in windage loss.
PART #
DESCRIPTION
APPLICATION
6061-T6 aluminum construction
1/4" NPT thread in
29-4000-8
PACKAGE OF 8 VALLEY VENTS
CHEVROLET SMALL BLOCK
Machined with 9/16" hex for ease of installation
OIL RESTRICTOR KITS
Race engines equipped with roller rocker arms and mechanical roller lifters should have the flow of oil to the
lifters restricted. Our Oil Restrictor Kits force more oil to the engine bearings where it is needed, and also
cut horsepower losses caused by oil windage. Engine Pro offers two styles of restrictor kits. Part #29-4004
consists of a pair of precisely drilled aluminum restrictors which replace the rear block galley plugs.
Part #29-4005 consists of precisely drilled steel plugs which are screwed into threaded oil passages.
PART #
DESCRIPTION
APPLICATION
29-4004
ALUMINUM RESTRICTOR KIT
CHEVROLET SMALL BLOCK AND BIG BLOCK.
29-4005
STEEL RESTRICTOR KIT
CHEVROLET SMALL BLOCK AND BIG BLOCK
CAUTION: OIL RESTRICTOR KITS ARE NOT FOR USE WITH HYDRAULIC LIFTERS.
MAGNET KIT
The Engine Pro Universal Magnet Kit assures the pick up of any metal fragments before they reach critical
areas of the engine. Magnets can be installed in cylinder heads, intake valley and oil pans.
PART #
DESCRIPTION
CONTENTS
29-4003
UNIVERSAL MAGNET KIT
4 SMALL MAGNETS, 4 LARGE MAGNETS AND EPOXY.
HEAT TABS
For high temperature gas engines
Center melt material is certified
Center melts at 250 to 255F, 121 to 124C
PART #
DESCRIPTION
80-1000-100
BAG OF 100 HEAT TABS
BELL HOUSING TO BLOCK DOWELS
These +.400 extra length (1.550 total length) solid steel dowels fit both Chevrolet small block and
big block engines.
PART #
APPLICATION
29-2000-2
CHEVROLET SMALL BLOCK 1957-86, CHEVROLET BIG BLOCK 1967-91 (ONE PAIR)
NEW NUMBERS SHOWN IN BOLD FACE TYPE
50